How To Get Pc To Register Second Hard Drive
as for the HDD, is it a blank drive, if then exercise this
Open up computer management>>Disk management
come across if the HDD is shown. If so and if it is an empty HDD
right click on the drive and select format Quick NTFS
Then if it does non assign a drive letter,
right click and assign a drive letter for it
right click and make active
restart PC
And if you just connected these drives and logged into windows, at present restart the PC commencement so check.
Now for the 2 DVD drives, do they also show in disk management ?????
Are they USB drives or internal SATA or IDE
1 person found this answer helpful
·
Was this reply helpful?
Did you wait in device manager and come across if the drives are in the listing and if there are red or yellowish flags on them ?????
What nearly the hard drive, is information technology formatted, does it show.
Do they show in disk management ???????
Yous demand to become into your BIOS and check at that place and see if they are enabled or set in the boot order listing.
Make sure the box is unchecked>>Hide empty drives.
I would as well try the one above information technology and select SHOW Hidden.
one person found this respond helpful
·
Was this answer helpful?
The DVD and BluRay are SATA. All prove in the Device Director. Only when I showtime/restart windows they still don't testify.
Was this answer helpful?
No flags. Everything seems good, except windows don't show them.
Was this reply helpful?
Hello LeRoyStepp
-Right-click on This PC (it'south probably on your desktop, but you can admission it from the File Managing director, too)
-Click on Manage and Management window will prove up calculator management windows 10
-Go to Deejay Management
-Discover your second hard disk, right-click on information technology and go to Change Bulldoze Letter and Paths change drive letter windows x
-Go to Change and cull the letter for your partition from Assign the following drive letter: assign drive alphabetic character wind8apps windows ten
-Click OK, close all windows and restart your computer
If that did't work
-Go to Search, type device managing director and press Enter
-Aggrandize Disk drives, observe the 2nd deejay bulldoze, right-click on it and go to Update driver software hard disk update windows 10
-If there are whatever updates, follow farther instructions and your hard disk driver will be updated
I hope it helps you
Was this respond helpful?
Can you open up the Device Manager and expand "IDA ATA/ATAPI controllers"
What is listed?
Was this reply helpful?
should read "IDE ATA/ATAPI controllers"
Was this reply helpful?
Do they testify in disk direction ???????
Control Panel\All Command Panel Items\Administrative Tools
Open up Figurer Management>>Disk Management
ARE THEY THERE ????????
And they do not show upward in THIS PC location ??????
You need to become into your BIOS and cheque there and encounter if they are enabled or set in the boot order list.
Brand sure the box is unchecked>>Hide empty drives.
I would also effort the i higher up information technology and select Show Hidden.
IDE mode is designed to give the greatest amount of compatibility with older operating systems. If your operating organisation is not detecting your hard drive it is probable that you will need to specify your AHCI / RAID drivers, or enable IDE mode of the SATA controller. AHCI mode requires unique drivers.
https://www.evga.com/support/faq/afmviewfaq.aspx?faqid=58620
Simply you never did tell me what the Hard drive was, as in SATA or ATAPI/IDE or USB.
Was this reply helpful?
How To Get Pc To Register Second Hard Drive,
Source: https://answers.microsoft.com/en-us/windows/forum/all/how-do-i-get-windows-to-recognize-my-other-hard/b024c4d5-ac02-4e93-8e07-1f87859252ed
Posted by: gorebuttp1999.blogspot.com
0 Response to "How To Get Pc To Register Second Hard Drive"
Post a Comment